Operators trust an inspector that agrees with a known good board.
If the program paints the whole panel as must-be-coated, every connector becomes a defect.
Draw the coat region, the keep-out and the component body separately. The SC-350 is for single-side PCB and PCBA.
After coating or cure it checks missing coat, excess, overflow, foreign matter and edge offset, with a 12 or 25 MP camera, a cycle of 0.3 s per field of view, and boards from 50 × 50 mm to 350 × 350 mm.
The SC-500 is for stations that need boards up to 500 × 500 mm, color imaging and film thickness, with UV plus white light.
The SC-600 is for assembled boards, mixed panels and dual-head double-side coating, with two cameras and boards from 50 × 50 mm to 500 × 500 mm.
Bubbles in glue, bubbles in clear adhesive, missing white glue, splash, excess, foreign matter, through-hole parts and thin coat are set by region, not as one rule for the whole board.
Programs can also be edited offline while the line is running.
